10
NOTICE
CARBON OR ALLOY:
Do not face, surface, or cut the head tube bearing cups.
CARBON :
When removing adapters, bearings, or cup from the carbon head , extra care must be used so that the tool used to
drive out the bearing is NOT located on any part of the bonded cup.
45° UP
45° DOWN
12 mm
- or -
1.125”
KP119/
HEADSHOK TO 1.5
”
QSISEAL/
UPPER BEARING SEAL
58MM OD
HD169/
SI HEADSET
BEARINGS
HEADSHOK
1.5”
KP058/
HEADSHOK TO 1 1/8
”
INTEGRATED HEAD TUBE
In both alloy and carbon frame models, the SI bearing cups are intergrated within the head tube. In alloy frames, the cups are
machined in the head tube. In carbon models, cups are permanently bonded into the head tube. Cannondale Headshok System
Integration bearings are accepted directly into both type. The following headset kits are available through your Cannondale
Dealer:
Summary of Contents for FLASH 2010
Page 19: ......
