Cannondale Bicycles Owner'S Manual Download Page 110 | Manualshive

Page: 110 / 110

background image

This cover is printed on recycled paper.

Cannondale Customer Service: http://www.cannondale.com

USA: Call 1-800-BIKE USA, Fax: 814-623-6173.
Europe: Call 31-541-573580, Fax: 31-5415-14240.
Japan: Call 0722-99-9399, Fax: 0722-93-6166.
Australia: Call 61-2-9979-5851, Fax: 61-29979-5688.

In other locations, call your Authorized Cannondale Retailer.

©1999 Cannondale Corporation, Bethel, CT 06801. Version 90501299.

P

RE

-R

IDE

C

HECKLIST

Are you wearing a helmet and other appropriate equipment and
clothing, such as protective glasses and gloves? Do not wear
loose clothing that could become entangled in the bicycle.

Are your wheels’ quick-release skewers properly fastened? Be
sure to read the section on proper operation of quick-release
skewers (section 6).

Are your front and rear brakes functioning properly? With can-
tilever brakes (on mountain bikes, hybrids, tandems, touring), the
straddle cable must be attached. With caliper brakes (road bikes),
the quick-release must be closed. The brake pads must contact
the rim firmly without the brake levers hitting the handlebar.

Are your seatpost and stem securely fastened? Twist the handle-
bars firmly from side to side while holding the front wheel
between your knees. The stem must not move in the steering
tube. Similarly, the seatpost must be secure in the seat tube.

Are you visible to motorists? If you are riding at dusk, dawn
or at night, you must make yourself visible to motorists
through the use of front and rear lights. Reflectors alone do
not provide adequate visibility. Also, give strong consideration
to wearing reflective clothing.

Is it raining or wet? If so, be more cautious. Your braking
distances will increase, and your tires’ grip on the road will
decrease. Also, remember that motorists’ visibility decreases
with inclement weather.

Are your tires properly inflated? Tires must be inflated to
the recommended pressure in order to provide maximum
performance.

If you have any reason to suspect that your bicycle is not
functioning properly, DO NOT RIDE IT. Instead, have it
inspected by your Authorized Cannondale Retailer.

«
...
108
109
110

Summary of Contents for Bicycles















































































































Reviews:

No comments

Related manuals for Bicycles

Brand: Crosswave Pages: 48

Brand: Look Pages: 69

Brand: Burley Pages: 84

BIKBLM001YEL-UK

Brand: Made Pages: 183

G-Zero Endurance

Brand: Scott Pages: 9

Brand: e-Bikelifter Pages: 27

48V 1KW Motor Kit

Brand: Calibike Pages: 13

Active Hybrid E-Bike 2020

Brand: BMW Pages: 34

Pedal Power Utility Box

Brand: Rock The Bike Pages: 7

Brand: Hamax Pages: 24

Brand: Klarfit Pages: 44

Brand: Yedoo Pages: 40

Brand: Veelfella Pages: 29

Brand: Quantum Research Group Pages: 14

Brand: BAFANG Pages: 4

Brand: Legend Pages: 106

Brand: Rose electronics Pages: 4

Brand: Douze Pages: 33

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands