Cannondale Alloy Road Rim, Quick Start Manual, Page: 8 / 16

SET-UP STEP 2 STEP 1 STEP 3 STEP 4 PRE-RIDE CHECK
Step 3. Install your front wheel.
Prior to installing the quick-release skewer, please review the included
documentation. The quick release skewer is comprised of five major
parts: two conical springs; an adjusting nut; the skewer; and the lever
head.
Unthread and remove the adjusting nut and the neighboring conical
spring from the skewer. While holding the quick-release skewer by
the lever head, insert the skewer into the wheel axle.
Place the conical spring back onto the skewer with the narrow end
pointing toward the wheel, then thread on the adjusting nut.
Open the cable release at the brake caliper to enable the tire and rim
to pass through the pads.
A.
B.
C.
D.
A
B
C
D