Cannon imageRUNNER 5075, Support Manual

Page: 53 / 268

Parts and Their Functions 1-13
1
Be
fo
re
Y
o
u
Star
t Usin
g
Th
is Mach
ine
Feeder Parts and Functions
Originals placed in the feeder are automatically fed to the platen glass for copying.
If you are using the imageRUNNER 5075/5065/5055, you can select to scan
originals as two-sided documents with or without being turned over. If you are using
the imageRUNNER 5050, the feeder automatically turns over two-sided originals to
make one or two-sided copies.
CAUTION
Do not insert your fingers into the gaps around the original supply tray, as your
fingers may get caught. Also, be careful not to drop objects, such as paper clips
into the gaps, as doing so may cause damage to the machine or cause it to
break down.
IMPORTANT
•
When using the platen glass to copy or scan thick originals, such as books or magazines,
do not press down hard on the feeder.
•
If the original output area is blocked, originals may get damaged, and printing may not be
performed correctly. Therefore, do not place any objects in the original output area.
a Feeder Cover
Open this cover to remove jammed originals.
b Original Supply Tray
Originals placed here are automatically fed
sheet by sheet onto the platen glass. Place
originals into this tray with the surface that you
want to scan face up.
c
Slide Guides
Adjust the slide guides to match the width of the
original.
d Auxiliary Tray
Pull out the auxiliary tray if you are scanning
large size paper (11" x 17" or LGL).
e Original Output Area
Originals that have been scanned from the
original supply tray are output into the Original
Output Area in the order that they are fed in the
feeder.
f Original Set Indicator
Lights when originals are placed in the original
supply tray.
imageRUNNER 5050 imageRUNNER 5075/5065/5055
a
b
c
f e
a
b
c
g e
d
f