Cannon CT-2000, Instruction & Operation Manual, Page: 19 / 54

CANNON Instrument Company | Unpack & Assemble 11
Figure 9: Placing Rubber Gasket around Rim of Jar
8. Remove the large piece of foam packing from the inside of the cabinet. Also remove the small
piece of foam from the float level, located on the upper left corner of the inside of the cabinet.
9. Lower the glass jar into the cabinet so it seats squarely on the rubber support ring. Refer to
Figure 10.
Figure 10: Installing Bath Jar
10. Remove the wrapping from around the two glass panels. Place the thinner of the two pieces of
glass in the slot closest to the jar. Refer to Figure 11.
Figure 11: Placing Inner Glass Plate
Inner Wall