12
| CAV 4.2 Operation Manual
2.
Raise the display hood by pulling it forward, up, and then back in an arcing motion until the hood
rests on top of the frame. Once raised, the latches will keep the hood in position.
3.
Insert the
3
/
16
" Allen wrench into each drain plug access hole and verify that the drain plug is closed
(clockwise to close). See Figure 5 for drain plug location.
Figure 5 — Temperature Bath Details
4.
Insert the funnel into the thermometer hole in the top of the bath to be filled. See Figure 6.
Figure 6 — Bath Top (Fill Hole)
Cold fill level
Drain plug
access holes
Fill hole
