CANNON Instrument Company® | Sample TE Cooling
32
CAV® 4.1 Operation Manual
Sample TE Cooling
Note:
The TE-Cooling option is factory installed. This section is only applicable for
instruments with the cooling option installed. If your instrument is not
installed with TE-Cooling then you can skip this section.
If instrument is equipped with TE cooling option, follow the instructions outlined below in order to
engage the CAV 4.1 in thermoelectric bath cooling. Always use proper laboratory procedures and
caution when working with the CAV 4.1 instrument.
TE-Cooling Procedure
Using the CAV 4.1 GUI touchscreen:
1.
From the main menu, log in as a manager. Refer to Figure 44.
Figure 44 — Login as Manager
2.
Press
TE Cooler
button. Refer to Figure 45.
Figure 45 — Main Menu with TE Cooler Button
TE Cooler Button
(Grey indicates it’s OFF)
Login
Manager
