OPERATION
1.
Plug in the unit to a socket outlet. Make sure the power supply corresponds to the
ratings on the data plate of the appliance.
2.
Press Main Switch on left side of the heater. The mark ”-” in the digital display
starts flashing showing the heater is on standby.
Press MODE button on control panel or remote control to switch the heater on or to
higher power. Power setting level 1 (low), level 2 (medium), level 3 (high) will show on
the digital display.
Press TIMER “+/-” button on control panel or remote control to choose the timer
between 0-9 hours. “0” means the timer is off.
The digits of the power settings and timer will be displayed on the unit, as selected:
-
The heat power settings (1, 2 or 3) show displayed for ten seconds,
-
Timer selection (0 to 9) stays flashing for five seconds.
3.
To shift the heater to standby mode, press OFF button on control panel or remote
control. The mark ”-” in the digital display starts flashing again.
4.
To switch off the heater, press Main Switch on the left side of the heater accordingly.
Models: CAST18R, CAST24R, CAST32R
