3. TECHNICAL DESCRIPTION
1. Drill rod
2. Drill rod
3. Drill rod
4. Trigger
5. Safety button
6. Grab handle
7. ON/OFF switch
8. Handle
9. Motor
10. Recoil
11. Fuel tank
4. FILLING THE FUEL TANK
WARNING: When filling the tank:
– The drill should always be stopped and cooled.
– Never smoke during refueling. It must not have flames or sparks near the
fuel.
– Do not attempt to refuel when the engine is hot.
– If fuel has been spilled, immediately stop refueling and do not start the
engine. Clean up the spill and fill the machine in another location.
– Never fill the fuel tank to the flange; there is a risk of overflow.
– Do not refuel in a closed and unventilated area.
The fuel used for this tool is a mixture of unleaded gasoline and registered
engine lubricant. When mixing gasoline with oil, use only gasoline that does not
contain ethanol or methanol. Unleaded gasoline is a quality gasoline type. This
will help to avoid damaging the fuel lines of the engine and other engine parts.
The recommended mixing ratio is 40:1 (make sure the mixing ratio is correct
before filling the product.
