CanMore CAN6-CT6, Quick Start Manual, Page: 5 / 8

Applicaation circuit :
GPS Ative antenna specification (option)
Frequency 1575.42MHz GAIN 18~28dB
Output Impedance 50
Ω
Noise Figure 2dB
Polarization RHCP Antenna Voltage 3V
Pinout Description :
Name descripton
1,4,5,6,7,8,14,1
5,16,17,18,19 NC No connection
3 1pps
One-pulse-per-second (1PPS) time mark output, 3V LVTTL. The Pin
provides one pulse-per-second output , when getting 3D position
fix. The pulse duration is about 4msec at rate of 1 Hz.
9
VCC_RF 3V output voltage from RF section Can supply 3V active antenna
via an inductor-choke.If use Patch antenna not connect the pin.
10,12,13
RF_GND RF _Ground
11
RF_IN GPS RF input, connect to antenna