blinking rapidly, press down Scan Button.
Step 3
Release Scan Button and Small Trigger.
Scan Sequence
First read
Enter
label, and then scan the following barcode:
4-4. Clear one single data
Button Trigger
Step 1
Configure the scanner to be in Memory mode.
Step 2
In Memory mode, Press down Small Trigger and scan
the barcode you want to remove from the flash memory.
4-5. Auto-delete all transmitted data
You may program the scanner by scanning
Enable
label to
auto delete the barcode data that was just transmitted after
reading
Enter
barcode.
4-6. Attempt a firmware update
Please read
Enter
label first, and then scan
ISP
barcode before
applying relative scanner firmware updates.
5. How to Make your Scanner Work with a
Bluetooth HID Dongle
5-1. Pair with Bluetooth HID Dongle
Step 1
Make sure the Bluetooth dongle is well secured into
the USB port of the Host PC.
Step 2
Scan
ENTER
barcode.
Step 3
Scan
To BT Mode
barcode to enter Bluetooth mode.
Step 4
Press down either Scan Button or Small Trigger to recover
Bluetooth connection. A solid Blue LED indicates a successful
attempt.
Step 5
Open the referred word processing software to receive
the scanned barcode data.
5-2. Disable the pairing function
Once a Bluetooth connection is established,
Disable
the pairing
function, after scanning
Enter
barcode, to avoid the incident of
mistakenly repeating the pairing process.
5-3. Type of Bluetooth connection
The type of Bluetooth connection varies according to the
Bluetooth device you attempt to pair the scanner with.
Whenever you need to establish a Bluetooth connection, specify
this information out of six alternatives provided.
Use the supplementary program, "Barcode S
*B87A1*
Enable
*B87A0*
Disable
*ZISP*
ISP
*ZTOB*
To BT Mode
*BE280*
Disable
*BE281*
Pair
*BE1D1*
SPP Slave
*BE1D2*
SPP Master
*BE1D3*
HID
*BE1D4*
iOS
*BE1D5*
A303
*BE1D6*
A302
*ZFCA*
Data Memory Clear
2D wireless
Barcode
Reader
Quick Start
5
4