CANGAROO JESSICA, Instruction Manual

Page: 17 / 62

17
•
New and used batteries are not to be mixed.
•
Batteries are to be inserted with the correct polarity.
Protect the environment by not disposing of this product in
household waste containers (2002/96 / EU). Check the
recommendations of local authorities.
IMPORTANT!
The diagrams and figures in this instruction are illustrative and indicative
only. Follow exactly the instructions and sequence for assembling and operating with
the product. Check the securing of the fixation after each operation. Fixing a certain
position in most cases is accompanied by a clicking sound.
Components - illustration A
After unpacking, make sure that all elements of illustration A are available.
Assembly of the structure – illustration C
Open the legs of the swing until a click is heard. Secure the footrests until a click is
heard. Assemble the two parts of the seat. Open both parts and tighten with 2 screws
on each side (4 screws in total). Place the upholstery first at the top (with the cushion)
and then at the bottom. Stretch the upholstery well. Fix the two seat holders in the
plastic elements of the structure until a click is heard.
Toy bar – illustration D
Place the three shoulders of the fingerboard at its base. Then fix the three toys in the
shoulders. Insert the fingerboard into the designated hole in the structure. You can
rotate the fingerboard to the desired position.
Put 2 pcs. 1.5V AAA batteries (LR03) in the battery compartment of the fingerboard.
Turn on the fingerboard. You can turn on the automatic rotation of the fingerboard
and / or its light function.
Folding – illustration E
Fold the swing by pressing both buttons on both sides of the frame.
Stop the swinging function – illustration F
To stop the swing, press the lock button. To continue swinging, release the button.
Installing the restraint system - illustration G
Unbutton the mechanism before placing the baby. Place the baby and fasten the belts
(you will hear a "click" sound when properly fixed in the buckle). Fasten the belts
around the child's waist in a position that is comfortable for him. Check the restraint
system by pulling it slightly away from your child. The restraint system must remain
attached.
ASSEMBLY INSTRUCTIONS
OPERATING INSTRUCTIONS