CanEVER® Audio
CanEVER AUDIO ®
CANEVER Ing. MARIO
Via Como 43/2 – 30027 San Donà di Piave - Venice – Italy
Via P. Castaldi n.6 – 30020 Noventa di Piave – Venice – Italy
Mob. +39 335 7082807
www.canever.eu
P.IVA-VAT: IT04171260278 VIES validated - C.F.-Fiscal Code: CNVMRA60A22H823C
INFRARED REMOTE CONTROLLER
Button
Value
Balance
Left to Right in steps of 0.5dB each. Range is 0-5dB
Volume
Up and Down steps of 1.0dB. Range is -60dB to 0dB
Phase
Absolute Polarity < toggle > Inverse Absolute Polarity
Mute
Mute < toggle > Play
Input
Skip to the following active INPUT
How to pair the remote controller (RC)
.
The RC coming with each
ZeroUno
PLUS
has been paired to the unit already
in the factory by selecting one of 256 possible pairing codes.
In case of interference with the RC´s of other electronics in the household,
the preselected RC code can be changed at any time.
To pair the RC and the
ZeroUno
PLUS
do the following:
1) Move the RC in front of the
ZeroUno
PLUS
(about 1 meter).
2) Press any button on the RC.
3) Enter in SETUP mode pressing the SETUP button for at least 2
seconds and less than 10 seconds.
4) When in SETUP Mode, KEEP PRESSED the INPUT button close
the Volume knob.
5) Holding the INPUT button pressed, PRESS again the SETUP button.
6) Release both buttons (INPUT & SETUP).
7) RC now is paired.
If there is still interference with other RC´s in the household, please restart the process above described to
generate another code.
When the RC communicates with the
ZeroUno
PLUS
, a dot appears at the bottom-right corner of the display.
If this dot does not appear, check the battery inside the RC controller (battery type: CR2032B)
When replacing the battery, pay attention to insert it in the right way (check +/- position!!!).
To get an instant feedback about the
ZeroUno
PLUS
status, every time the VOLUME, BALANCE and MUTE
button is pressed at the RC, the display shows the value for VOLUME, BALANCE and MUTE in tall digits for
5 seconds.
````
!!~
`
|!~
```
`
`
`!~
```
`
|’!
`
`
`
`
`
|’`
`
`’`
````
`""
`
”"“
`
”"`
`
`"“
When the
VOLUME
buttons are pressed the attenuation changes in
steps of 1.0dB.
The range is -65dB to 0dB.
If the button is pressed constantly, the attenuation changes quickly.
```
`
!!~`|!`!!````!~
````
`
```
!!~
`|!
`!!
``
````
`
````
’`
```
!’‘
’`
````
`""
`
""“
`
"
"
”"“
"`
`````````
I
I
`````````
``!~`
|!~
````
|!~
```!~
``|!`
`
`
`
`|``
`
`
`
```’`
```"`
”"“
`
""
`
”"“
```"“
When the
BALANCE
buttons are pressed, the balance changes in
steps of 0.5dB steps.
Range is LEFT -5.0dB to RIGHT +5.0dB.
To help the user the 1
st
row of the display reports a bar showing the
position of the balance value in the range -5.0dB to 5.0dB.
