Candy RTL 871SZ-19, Owner'S Manual

Page: 10 / 40

Installation & Adjustment
7
Inlet pipe connection
The new hose-sets supplied with the appliance are to be
used and that old hose-sets should not be reused.
1.Connect the water inlet hose to the water tap. You may have
to use pliers to tighten the coupling. Do not over tighten as this may
cause damage to the valve or hose fittings.
2. Connect the other ends to their respective cold and hot water inlet valves
located on the top of the washer.
3. Fasten each hose on the washing machine and ensure a tight connection.
Check the inlet hose connections
1.Swing the hose gently to confirm that the hose is
securely fastened.
2.After installation, open the tap to check for leaks.
Remove the water inlet hoses
1.Turn off the water taps.
2.Loosen each connection at water taps and washer.
3.Do not bend the hose unduly.
4.Periodically check the hose connections are firm
at both ends. This is to ensure the connections
remain watertight over time.
3.Carefully remove each hose separately, as they may contain residual water.