Candy RTL 8101SZ-19, Owner'S Manual, Page: 8 / 40

Please install and adjust the machine according to the directions contained in this
manual.It is very important to follow these directions for the safe operation of the
machine and to ensure your machine operates correctly.
Installation & Adjustment
5
Back
Front
Screw
Bottom plate Carpet
Do not install this machine on an incline greater than 2° . Installing machine on an
angle or on rough ground will result in unstable running or stoppage of the
machine. Please adjust it by the following method:
1.Confirm it is level
2.Lift up the side of the leg slightly and twist the adjustable leg.
Note: The distance between the washing machine
and wall:at least 20 mm.
20mm 20mm
High
Low
Balance washing machine
Install the bottom plate
The purpose of the bottom plate is to su ppress noise
from the washing machine during operation.
Steps:
1. Lay the washer on its back, on a nonabrasive surface.
2. Place the plate onto the bottom of the machine.
3. Use a screwdriver to tighten the screw ( in accessory
bag) securing the panel to bottom of the washer.
4. Once the screw is tight and the panel is secure, return
the washer to its standing position.