2.1 SETTING THE CLOCK
•
When the appliance is connected to the domestic power supply for the first time, or after a power cut,
four dashes will appear on the display (----).
In order to set the clock, proceed as described below:
33
CHAPTER 2 – USING THE CONTROLS AND MODES
Press the
Clock
key (6).
(The hours flash on display 1)
1
Set the desired time by turn-
ing the
Time
knob (14).
(The hours flash on display 1)
2
Press the
Clock
key (6) again.
(The minutes flash on display 1)
3
Set the desired minutes by
turning the
Time
knob (14)
(The minutes flash on display 1)
4
Press the
Clock
key (6) again.
(The display shows the time set)
5
•
If you wish to change the hour on the dial once it has been set, press the
Clock
key (6) before proceed-
ing to set the new time as described above.
•
It is possible to display the current time even after starting the mode set, by pressing the
Clock
key (6)
(the time is displayed for 2 seconds).
150
WATT
300 500 750 1000
150
WATT
300 500 750 1000
150
WATT
300 500 750 1000
150
WATT
300 500 750 1000
150
WATT
300 500 750 1000
GB 10-10-2001 11:33 Pagina 33
