11
Starting a wash cycle...
Draw out the basket(see the section entitled
Loading the Dishwasher
).
Pour in the detergent (see the section entitled
Salt,
Detergent and Rinse Aid
).
Insert the plug into the socket. The power supply is 220-240
VAC 50 HZ, the specification of the socket is 10 A 250 VAC.
Make sure that the water supply is turned on to full pressure.
“
”
“
”
Press the program button , the wash program will be changed as follows direction
If a program is selected, the response light will light. Then press the
button, the dishwasher begins to start.
ECO->
->Intensive->Normal
Glass->90 min->Rapid
;
Start/Pause
When you press the
button to pause during washing,
the program light will stop blinking and the dishwasher will mooing
every minute unless you press the
button to start.
Start/Pause
Start/Pause
For normally soiled loads,
such as pots, plates,
glasses and lightly
soiled pans.
For heaviest soiled crockery,
and normally soiled pots
pans
dishes etc with dried
on soiling.
、
、
A shorter wash for lightly soiled
loads and quick wash.
For lightly soiled crockery
and glass.
15g
120
180
140
30
90
0.7
0.61
0.9
0.23
0.65
8
6.5
10
6
7.0
Pre-wash
Wash (60
)
Rinse
Rinse (70
)
Drying
℃
℃
Pre-wash
Wash (50
)
Rinse
Rinse (70
)
Drying
℃
℃
Wash(65
)
Rinse(70
)
℃
℃
Drying
Wash (40
)
Rinse
℃
Rinse (40
)
℃
Intensive
Pre-wash 50
Wash (70
)
Rinse
Rinse
Rinse (70
)
Drying
℃
℃
℃
(
)
90 min
Rapid
Normal
(*EN 50242)
*EN 50242 : This programme is the test cycle. The information for comparability test
in accordance with EN 50242, as follows:
Capacity: 6 setting
The power consumption of off-mode is 0.45W
left-on mode is 0.49W
Rinse aid setting: 6
This is standard programme,
it is suitable to clean normally
soiled tableware and it is the
most efficient programme in
terms of its combined energy
and water consumption for
that type of tableware.
Wash (45
)
Rinse
Rinse (60
)
Drying
℃
℃
For lightly soiled loads,
such as glasses, crystal and
fine china.
75
0.5
7.0
Glass
(or
)
3in1
3/15g
(or
)
3in1
3/15g
(or
)
3in1
3/15g
