19
EN
6)Kg DETECTOR Indicator
Available on Cotton and Synthetic cycles, during the first 4
minutes of the cycle the intelligent sensor will weigh the
laundry and adjust the cycle time, water and electricity
consumption accordingly.
7) STAIN LEVEL
Once the programme has been selected the indicator light
will automatically show the stain level set for that
programme. Selecting a different stain level the relevant
indicator will light up.
8) DRYING PROGRAMME INDICATORS
The indicators display the type of the drying programme:
Automatic Programmes: By selecting one of these 3
automatic programmes, the washer-dryer will calculate the
time needed for drying and the residual dampness
required, according to the load and drying type selected.
After pressing the START button, the display will shown the
drying time remaining.
The appliance calculates the time to the end of the
selected programme based
upon a standard loading, during the cycle, the appliance
corrects the time to that applicable to the
size and composition of the load.
= Extra dry drying programme (recommended
for towels, bathrobes and bulky loads)
= Cupboard dry drying programme
= Iron dry drying programme
USEFUL TIPS:
The 30 minute drying programme is recommended for small
loads (less than 1 kg) or slightly damp loads.
Your washer-dryer ends the cycle automatically when it
reaches the drying level selected.
For the correct operation of the appliance, it is preferable
not to interrupt the drying phase unless it is really necessary.
Timed programmes:
120 minutes – 90 minutes – 60 minutes – 30 minutes:
They may be used to select timed drying programmes.
Cool down phase
:
Switched on during the final cool down period, in the last 10
minutes of each drying phase.
6
}
7
{
8
