Candy GO FS Instructions For Use Manual Download Page 14

Appliance complies with European Directives 73/23/EEC and 89/336/EEC, replaced
by 2006/95/EC and 2004/108/EC, and subsequent amendments.

Technical data

Max. load of dry laundry

Water pressure 

Measurements

Width

Depth

Height

NB: For specifications regarding electrical data, see the data panel on the front of the washing
machine (porthole area) - as shown in diagram above.

Fig. 2

27

8 kg

0,05 ÷ 0,8 MPa

60 cm

52 cm

85 cm

26

7 kg

0,05 ÷ 0,8 MPa

60 cm

40 cm

85 cm

6 kg

0,05 ÷ 0,8 MPa

60 cm

40 cm

85 cm

Note:

The use of environmentally-friendly, phosphate-free detergents can have the following effects:
-

waste water from rinsing may be cloudier because of the presence of zeolites held in
suspension, without the rinse performance being adversely affected;

-

presence of white powder (zeolites) on laundry after washing, which is not absorbed by
the fabric and does not alter the colour of the fabric.

-

The presence of foam in the final rinsing water is not necessarily an indication of poor
rinsing.

-

Anionic surfactants used in washing detergent formulae often prove to be difficult to
remove from the laundry itself and, even in small quantities, can still cause considerable
foam production.

-

Carrying out more rinse cycles does not serve any purpose in such cases.

CUSTOMER SERVICE AND GUARANTEE

Your new appliance is fully guaranteed by the manufacturer for 12 months against
electrical/mechanical breakdown excluding: 

A.

Any faults which occur due to bad installation or misuse of the machine.

B.

Any faults which occur due to repair of, or interference with, the machine by any person

not authorised by the manufacturer to carry out service.

C.

Any faults which arise from parts fitted to the machine which are not the manufacturers

original parts.

D.

Any faults arising from non-domestic use or unusual or abnormal use of the machine.

E.

Any faults arising from operation at an incorrect voltage.

F.

Any faults arising from incorrect operation of the machine.

The guarantee applies to Gt. Britain and Northern Ireland only, and is an addition to your
statutory rights.

After Sales Service

If, having investigated the possible malfunctions on the chart on the previous page, you
believe the appliance is not working correctly, please call our After Sales Service dept. on
telephone number:

Gias Service     -      Tel: 08705 400 600 

Support Service        (Eire 0818 2000 21)

Summary of Contents for GO FS


















Reviews: