B2 delayed start key
The washing machine can be set to start the programme selected 3, 6, or 9 hours after setting. To do
this, proceed as follows:
- Select the desired programme via the programme selector A.
- Press the delayed start key until the desired delay indicator lamp lights up.
- Press the start/pause key
(
H).
- The washing machine will start up after the time selected.
If you prefer to cancel the programmed start-up time, press the (B2) key again until all the delay lights
have switched off.
Time remaining to end of cycle or programme phase display (V).
Models with this feature display the APPROXIMATE time remaining to the end of the programme in
minutes, or the current wash phase of the programme set. The programme times may vary depending
on the temperature selected, ambient temperature, mains water pressure, the quantity and type of
washing.
“Door lock” lamp (G)
.
The door lamp flashes when a wash programme starts, and then burns steadily. From that moment on
the door is locked (DOOR LOCK).
The DOOR LOCK lamp remains on during the whole wash cycle, thus preventing the door from
opening.
At the end of the wash cycle, the safety devices are deactivated, the light goes out and the door can
then be opened.
Cancel-change programs
Once you have started a program, and wish to change or cancel it, you should proceed in the following
manner,
- Put the program selector in the OFF position. At that instant, you have cancelled the program
and can if you wish to do so, select a new one.
- Select the new program.
- Press the (H) key until one of the programme phase lights turns on.
The washing machine will perform the new selected program.
Programme Pause
To pause the wash programme so that more washing can be added, proceed as follows:
- Press the (H) key until the lights on the option keys and the programme phase light have turned on.
- When the Door Lock lamp goes out (after approx. 2 minutes), open the door and put the additional
washing into the drum.
- Close the drum door and the lid properly.
- Press the start key (H), the time remaining lamp will light up and the machine will continue with
the programme.
At the end of the programme, all the programme phase lights will be lit up, and safety door light will
shut off.
For your own safety, set the programme selector to OFF before opening the washing-machine
lid and the drum doors to remove the washing.
17.10.13 / H- 46007450 EN
