Control panel and indicator lights
Programme Selector
– select the required programme
On/Off (Marche/Arrêt) button and indicator
– press to switch on, the indicator
will light
START (Départ) button
– Press to commence the selected drying programme.
Press for 5 seconds to cancell/reset the programme
Acrylics/Synthetics (Séchage Délicat) button
– press to reduce the heat level
for delicate items, the indicator above the button will light up. To change the
heat setting the programme must be reset.
Low Heat – Indicator light
ON
High Heat – Indicator light
OFF
FILTER CARE (Entretien Filtre) Indicator
– lights when the filter needs cleaning
START DELAY (Départ Différé) Button
– Allows the user to delay the start of
the drying cycle (see details of operation on page 14).
Time Remaining (TEMPS RESTANT) Display
START
– When the dryer is switched On the START indicator will flash, when
the programme starts the START indicator will light up
60'
– Indicator lights when there is less than 60 minutes left until completion
of the programme
15'
– Indicator lights when there is less than 15 minutes left until completion
of the programme. At this stage of the drying cycle the machine enters the
Cool down phase
STOP
– Indicator lights when the programme is finished.
6h
– 6 hour start delay (light flashes when in operation)
9h
– 9 hour start delay (light flashes when in operation)
11
Controls and indicators
FILTER CARE
INDICATOR
TIME REMAINING
DISPLAY
START
BUTTON
START DELAY
BUTTON
ON/OFF
BUTTON
ACRYLICS/SYNTHETICS
BUTTON
PROGRAMME
SELECTOR
40003552Eng.qxd 20/07/2005 16:24 Page 11
