Candy CUTC64, User Manual

Page: 4 / 66

During cooking, moisture may condense inside the oven cavity or on the glass of the door. This is a
normal condition. To reduce this effect, wait 10-15 minutes after turning on the power before putting food
inside the oven. ln any case, the condensation disappears when the oven reaches the cooking
temperature.
Cook the vegetables in a container with a lid instead of an open tray.
Avoid leaving food inside the oven after cooking for more than 15/20 minutes.
WARNING: the appliance and accessible parts become hot during use. Be careful not to touch any hot
parts.
WARNING: the accessible parts can become hot when the grill is in use. Children should be kept at a safe
distance.
WARNING: Accessible parts may become hot during use. Young children should be kept away.
WARNING: ensure that the appliance is switched off before replacing the bulb, to avoid the possibility of
electric shocks.
WARNING: in order to avoid any danger caused by the accidental resetting of the thermal interruption
device, the appliance should not be powered by an external switching device, such as a timer, or be
connected to a circuit that is regularly switched on and off.
Children under 8 should be kept at a safe distance from the appliance if not continuously supervised.
Children should not play with the appliance.
The appliance can be used by those aged 8 or over and by those with limited physical, sensorial or mental
capacities, without experience or knowledge of the product, only if supervised or provided with instruction
as to the operation of the appliance, in a safe way with awareness of the possible risks.
Cleaning and maintenance should not be carried out by unsupervised children.
Do not use rough or abrasive materials or sharp metal scrapers to clean the oven door glasses, as they
can scratch the surface and cause the glass to shatter.
The oven must be switched off before removing the removable parts. After cleaning, reassemble them
according the instructions.
When inserting the grid tray pay attention that the anti-slide edge is positioned rearwards and
upwards.
Only use the meat probe recommended for this oven.
Connect a plug to the supply cable that is able to bear the voltage, current and load indicated on the tag
and having the earth contact. The socket must be suitable for the load indicated on the tag and must have
ground contact connected and in operation. The earth conductor is yellow-green in colour. This operation
should be carried out by a suitably qualified professional. ln case of incompatibility between the socket
and the appliance plug, ask a qualified electrician to substitute the socket with another suitable type. The
plug and the socket must be conformed to the current norms of the installation country. Connection to the
power source can also be made by placing an omnipolar breaker, with contact seperation compliant to
the requirements for overvoltage category III, between the appliance and the power source that can
bear the maximum connected load and that is in line with current legislation. The yellow-green earth
cable should not be interrupted by the breaker. The socket or omnipolar breaker used for the connection
should be easily accessible when the appliance is installed.
The disconnection may be achieved by having the plug accessible or by incorporating a switch in the
fixed wiring in accordance with the wiring rules.
lf the power cable is damaged, it should be substituted with a cable or special bundle available from the
manufacturer or by contacting the customer service department. The type of power cable must be
H05V2V2-F. This operation should be carried out by a suitably qualified professional. The earth
conductor (yellow-green) must be approximately 10 mm longer than the other conductors. For any
repairs, refer only to the Customer Care Department and request the use of original spare parts.
Failure to comply with the above can compromise the safety of the appliance and invalidate the
guarantee.
Any excess of spilled material should be removed before cleaning.
A long power supply failure during an occurring cooking phase may cause a malfunction of the monitor. ln
this case contact customer service.
The appliance must not be installed behind a decorative door in order to avoid overheating.
When you place the shelf inside, make sure that the stop is directed upwards and in the back of the cavity.
The shelf must be inserted completely into the cavity.
WARNING: Do not line the oven walls with aluminium foil or single-use protection available from stores.
Aluminium foil or any other protection, in direct contact with the hot enamel, risk melting and deteriorating
the enamel of the insides.
WARNING: Never remove the oven door seal.
04 EN
04 EN