26
9. DRYING CYCLE
l
Drying guidance advice is general, but
practical experience of using the product
will help you to achieve the best drying
results.
l
We recommend setting a lower drying
time than indicated, when first using the
appliance in order to establish the degree
of dryness required.
l
We recommend not drying fabrics that
fray easily, such as rugs or garments with
a deep pile, in order to avoid air duct
clogging.
l
We recommend that you sort the laundry
by the following methods:
- By drying care symbols, which are
displayed on the clothing labels
Suitable for tumble drying.
Tumble dry at high temperature.
Tumble dry at low temperature only.
DO NOT
tumble dry.
- By size and thickness
Whenever the wash load is bigger than
the drying capacity, separate the clothes
according to thickness (e.g. towels from
thin underwear).
- By fabric type
Cottons/linen: towels, cotton jersey, bed
and table linen.
Synthetics: blouses, shirts, overalls, etc.
made of polyester or polyamide, as well
as for cotton/synthetic mixes.
l
Only dry pre-spun laundry.
l
Open the door.
l
Fill with the laundry, not exceeding the
maximum drying load indicated in the
programme table. For large items (e.g.
sheets) or very absorbent items (e.g.
towels or jeans), it is a good idea to
reduce the load.
l
Close the door.
l
Select the more suitable drying program
for your laundry (
HIGH HEAT, LOW
HEAT, DRY WOOL
).
l
Select the degree of dryness that you
require:
EXTRA DRY
(suitable for towels, bathrobes and bulky
loads).
IRON DRY
(that leaves the laundry ready for ironing).
CUPBOARD DRY
(for items that will be put away without
ironing).
TIMED DRYING PROGRAMS
-
120
MINUTES
-
90
MINUTES
-
60
MINUTES
-
30
MINUTES
l
The washer dryer will calculate the time
needed for drying and the level of
moisture remaining in the laundry,
according to the load and drying type
selected.
If the fabric does not have a care label,
you should assume that it is not
suitable for drying.
The correct way to dry
By
selecting
the
wool
drying
programme, it's not possible to select
a degree of dryness different from the
default one.
