9
➢
The “green-yellow” earth wire must be connected to the terminal marked
. It
must be about 10 mm longer than the live and neutral wires.
➢
The “blue” neutral wire must be connected to the terminal marked with letter (N)
- the live wire(L1) must be connected to the terminal marked with letter (L1)
(220-240V 1N
～
).
➢
The “blue” neutral wire must be connected to the terminal marked with letter (N)
- the live wire L1 must be connected to the terminal marked with letter (L1),. the
live wire L2 must be connected to the terminal marked with letter (L2)
(380-
420V 2N
～
).
Description of the Ceramic hob surface layout
4 zone ceramic hob schematic diagram
Display mode and control
1.1 Display mode
✓
Cooking zone working indicator:
the corresponding indicator light display when the
cooking zone is working;
✓
Cooking zone residual heat indicator:
the corresponding indicator flashes when the
cooking zone stops working (once every 1 second);
✓
The whole hob standby mode indicator:
all cooking zone indicator lights alternately
turn on and off .
