43
4.
Press the same button again (
"b0"
will
appear on the display to indicate that the
alarm is off).
5.
Turn off the dishwasher by pressing the
"ON/OFF"
button to confirm the new
setting.
To turn the alarm on again, follow the same
procedure.
IMPORTANT
This dishwasher is equipped with an
anti-overflow safety device which will
automatically discharge any excess
water should a problem occur.
WARNING!
To ensure the correct operation of
the anti-overflow safety device, we
recommend that the dishwasher is
not moved or tilted during operation.
If however it is necessary to tilt or
move the dishwasher, please ensure
that the washing cycle is complete
and that there is no remaining water
inside the dishwasher.
The dishwasher is able to signal a series of faults in the display.
AUTOMATIC FAULT SIGNALS
FAULTS
CAUSE
SOLUTION
E2
appears on the display and
the alarm sounds.
No water (inlet hose closed).
Turn off the dishwasher, open the
inlet hose and reset the cycle.
E3
appears on the display and
the alarm sounds.
The machine cannot drain water.
Check if the drain tube is bent or if
the siphon or filters are clogged.
If the problem persists, contact
Customer Service.
E4
appears on the display and
the alarm sounds.
Water leak
Check if the drain tube is bent or if
the siphon or filters are clogged.
If the problem persists, contact
Customer Service.
E5,E6,E7,Ef
or
EL
appears
on the display and the alarm
sounds.
Electronic control fault.
Contact Customer Service.
E8
or
Ei
appear on the display
and the alarm sounds.
The water heating element is not
working correctly or the filter plate is
clogged.
Clean the filter plate.
If the problem persists, contact
Customer Service.
