Candy CCF 85, Instructions For Use Manual

Page: 4 / 12

English Instruction for use CHEST FREEZERS
© 0512
fi CONS 2
GB
Electrical Safety Instruction
WARNING !
THIS APPLIANCE MUST BE EARTHED.
IF THE MAINS LEAD OF THE APPLIANCE
IS FITTED WITH A PLUG:
FUSE REPLACEMENT
If the mains lead of this appliance is fitted with a BS
1363A 13 amp fused plug, to change a fuse in this
type of plug use a A.S.T.A. approved fuse to BS
1362 type and proceed as follow:
1. Remove the fuse cover ( A )
2. Remove the fuse ( B )
3. Fit replacement fuse into plug
4. Refit the fuse cover
IMPORTANT:
The fuse cover mast be refitted when changing a
fuse and if the fuse cover is lost the plug must not be
used until a correct replacement is fitted.
Correct replacements are identified by the colour
insert or the colour embossed in words on the base
of the plug. Replacement fuse cover are available
from your local electrical store.
CONNECTION TO A REWIREABLE PLUG
If the fitted plug is not suitable for your socket outlet,
then it should be cut off and disposed of in order to
avoid a possible shock hazard should it be inserted
into a 13A socket elsewhere.
A suitable alternative plug should then be fitted to the
cable.
The wires in this mains lead are coloured in
accordance with the following code:
BLUE
“NEUTRAL” ( N )
BROWN “LIVE” ( L )
YELLOW & GREEN “EARTH” ( E )
1. The YELLOW & GREEN wire must be
connected to the terminal in the plug which
s marked with the letter E
or by the Earth symbol
or
coloured green or yellow & green
2. The BLUE wire must be
connected to the terminal which is marked with
the letter
N
or coloured black
3. The BROW wire mast be
connected to the terminal which is marked with
the letter
L
or coloured red
A
B
BLUE
N
Connected to a
typical 13 amp plug
BROWN
N
YELLOW & GREEN
E
CABLE CLAMP