18
There is no
display when
the voltage is
too low, or the
fuse may be
open when the
voltage is too
high.
The voltage is too low or too
high.
Unplug the power plug and wait
until the voltage is normal
Poor
drainage
E1
The outlet of the drain pipe is
too high or blocked, resulting in
the water not being discharged
after 10 minutes
After checking the drain and
rectifying the fault, open the cover,
close it, and re-enter the drain.
Not
dehydrated
E2
No close the upper cover when
washing (pause and alarm) or
dehydration (cover and alarm)
Close the cover.
Dehydration
touch the
shell
E3
Because the laundry unevenly
touches the shell when it is
unbalanced during the
dehydration, the washing
machine will automatically
correct it, and if it is still invalid
after two times, it will alarm.
Open the top cover, place the
clothes manually and close the
cover.
Insufficient
water
injection
E4
The faucet is not on, the water
is stopped or the water
pressure is low. After 30
minutes, the water level is less
than the set water level.
Open the tap or wait until the water
pressure is normal before use.
Open the cover, close the cover,
and re-enter the water inlet
process.
Water level
sensor
abnormal
E6
Water level sensor failure,
open circuit or short circuit,
then automatically alarm.
Please have professional
maintenance personnel overhaul.
Water intake
or automatic
drainage
E7
Computer board, inlet valve, or
water level sensor is abnormal.
Turn off the power after the water is
finished. Please have professional
service personnel repair it.
Memory
chip failure
E9
Can't read and write
Turn off a machine
Foam
anomaly
EA
Excessive foam in dehydration Open the cover and close it.
Motor or
frequency
transformer
failure
F1-F3,F7 Frequency
transformer
Failure.
Restart the machine after shutdown
for 10 seconds.
If the fault has not
been solved, please repair it by
professional personnel.