C&T Solution MX200 Series, User Manual, Page: 28 / 29

MX200 l User’s Manual
28
4.1 Connecting with VIO Series Display Module
1. Locate the module connector slot and loosen the 1 screw.
2. Turn over the unit to have the bottom side face up, loosen the 2 screws of the module connector
bracket.
3. Turn over the unit to have the bottom side face up, loosen the 2 screws of the module connector
bracket.
Chapter 4: System Setup
In order to prevent electric shock or system damage, before removing the
chassis cover, must turn off power and disconnect the unit from power source.
W
ARNING