C&T Solution CT-CCV6X, User Manual

Page: 22 / 67

CT-CCV6X Intel Atom D2000/N2000 COM Express Type 6 Module
２１
IV. Features & Interfaces
4.1 Processor
The CT-CCV6X supports Intel
®
Atom D2550/N2600 processor. This 64-bit and
multi-core mobile processor built on 32-nanometer process technology is
based on a new micro-architecture. This architecture consists a processor and
Platform Controller Hub (PCH) to form a two-chip platform. The processor
includes Integrated Display Engine, Processor Graphics and Integrated
Memory Controller.
4.2 BIOS
The AMI uEFI BIOS, 2MB SPI Flash Rom is used in the CT-CCV6X module.
4.3 System Memory
The Integrated Memory Controller (IMC) of the processor supports one 64-bit
channel of DDR3 protocols. The channel allows the data transfer rate of
800/1066MHz with a 204-pin SODIMM socket. The maximum memory size of
the SODIMM socket is 4GB supported by Intel Atom D2550 on the CT-CCV6X;
2GB supported by Intel Atom N2600.
4.4 Graphics
Intel Atom Processor D2550 and N2600 contain an integrated graphics engine,
video decode and a display controller that supports two pipes to LVDS, CRT,
HDMI/DVI, DP, eDP. The graphic core frequency is 640 MHz at D2550 and
400 MHz at N2600.
4.4.1 Analog Display Port
The Analog Port provides a RGB signal output along with a HSYNC and
VSYNC signal. There is an associated Display Data Channel (DDC) signal pair
that is implemented using GPIO pins dedicated to the analog port. The
intended target device is for a CRT Based monitor with a VGA connector.
The Analog Port can directly drive a standard progressive scan analog monitor
up to a resolution of 1920x1200 pixels with 32-bit color at 60Hz.