manualshive.com logo in svg

C&T Solution ACO-6000, User Manual

Share
Download
C&T Solution ACO-6000 User Manual Download Page 102

ACO-6000-

KBL  |  User’s Manual

102

4.3.11  CSM Configuration

■

CSM Support

This item allows you to enable or disable CSM support.

■

GateA20 Active

This item allows you to select <Upon Request> or <Always>.
Upon Request: GA20 can be disabled using BIOS services.
Always: Do not allow GA20 disabling. This option is useful when any RT code is executed above 
1MB.

■

Option ROM Messages

This item allows you to select <Force BIOS> or <Keep Current>.
Force BIOS : The third-party ROM messages will be forced to display during the boot sequence.
Keep Current : The third-party ROM messages will be displayed only if the third-party 
manufactured had set the add-on device to do so.

■

INT19 Trap Response

BIOS reaction on INT19 trapping by Option ROM: Immediate - execute the trap right away; 
Postponed - execute the trap during legacy boot.

■

Boot option filter

This item allows you to select which type of operating system to boot.
UEFI and Legacy: Allows booting from operating systems that support legacy option ROM or UEFI 
option ROM.
Legacy only: Allows booting from operating systems that only support legacy option ROM.
UEFI only: Allows booting from operating systems that only support UEFI option ROM.

■

PXE Function

This item controls the execution of UEFI and PXE option ROM. Select <Do not launch>,  <UEFI> or 
<Legacy>.

■

Storage

This setting allows you to select whether to enable the UEFI or legacy option ROM for the storage 
device controller. Select <Do not launch>, <UEFI> or <Legacy>.

■

Video

This setting allows you to select whether to enable the UEFI or legacy video option ROM for the 
video device controller. Select <Do not launch>, <UEFI> or <Legacy>.

■

Other PCI devices

This item determines option ROM execution policy for devices other than Network,  storage or 
video. Select <Do not launch>, <UEFI> or <Legacy>.

Chapter 4: BIOS Setup

Summary of Contents for ACO-6000





















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands