C&T Solution ACO-6000-8L, User Manual

Page: 44 / 108

ACO-6000 l User’s Manual
44
Chapter 2: Switches and Connectors
Step of Setting Power Ignition
Step 1
To select power ignition by PC/CAR switch.
Step 2
To select battery input voltage by 12V / 24V switch.
Step 3
To configure the power off delay time, please check the Delay Time Setting Options in advance.
Step 4
To connect the power and ignition power
Example: Delay Time Setting for 5 minutes
1. If delay time set as “5 minutes”
2. The system will shut down 5 minutes later after
turning off the vehicle.
Step 1
Pin 1-2 (Left): PC Power Mode
Pin 2-3 (Right): Power Ignition Mode
Step 2
Pin 1-2 (Left): Battery 24V Input Mode
Pin 2-3 (Right): Battery 12V Input Mode
Switch 1 / 2 / 3 Power off delay time
ON / ON / ON 0 second
ON / ON / OFF 1 minute
ON / OFF / ON 5 minutes
ON / OFF / OFF 10 minutes
OFF / ON / ON 30 minutes
OFF / ON / OFF 1 hour
OFF / OFF / ON 2 hours
Step 4
To connect the battery power and
ignition power
Step 3