C&S Controls Laser LT RD-1550, Technical Manual, Page: 7 / 44

Introduction 3
1.3 Annunciators
The Laser LT remote display uses a set of six designated LED annunciators (shown in Figure 1-3) and a red and
green (stop/go feature lights). The annunicators are dependent on the status character. They can also be associated
with ASCII characters (
tokens ) and are shown in Table 4-1 on page 25 and the default status characters are shown
in Table 3-2 on page 14.
•
GR
and
NT
annunciators are lit to show whether the displayed weight is a gross or net weight.
•
lb, kg
annunciators indicate the units associated with the displayed value and represent primary and secondary
units.
•
0
indicates center of zero.
• indicates a standstill condition.
GR NT lb kg
G/N
B/N
ZERO PRINT UNITS
UNITS
TARE
R e d ( s t o p )
annunciator
G r e e n ( g o )
annunciator
Figure 1-3. Front Panel Display