background image

press the 

REDIAL

 button. The speakerphone is activated 

and the number is dialed out automatically. 

Redial 

Press the 

REDIAL

 button to redial the last dialed number. 

Auto-busy-redial 

While the dialed line is busy, press the 

REDIAL

 button and 

the unit redials it automatically every 10s. The unit rings to 
alert after it is connected. 

Flash 

The 

FLASH 

button is used to get new dial tone. 

Pause 

When the phone is installed behind a PABX it could be 
necessary to insert a pause between the line access code (0 
or 9) and the number you want to dial. When the 

PAUSE 

button is pressed the phone holds the line for a few seconds 
and a P-sign is shown on the display.   

Speakerphone volume control 

The speaker receiving volume can be adjusted via pressing 

VOLUME

 button while the speakerphone is on. 

VIP  

During reviewing the incoming calls, press the 

FLASH

 

button, LCD displays ‘ ’, press this button again, the ‘ ’ 
disappears. VIP number cannot be deleted and recovered by 
new call. 

Outgoing call review / delete / call out 

The phone stores automatically in memory the last Max. 67 
numbers which where dialed out. 
To redial a number from the outgoing call memory: 

                                              -EN 8- 
-

 

Summary of Contents for 3130IS














Reviews: