09K
，
12K
，
yellow-
green
3
brown
●
●
●
After tightening the screws, pull the wire slightly to
confirm whether it's firm or not.
●
●
Make sure that all wiring connections are secure and the cover plates are reinstalled
NOTE:
All wires between indoor and outdoor units must be connected by the qualified electric
contractor.
Electric wires must be connected correctly. Improper connection may cause malfunction.
Tighten the terminal screws securely.
Make sure that the electric connections are earthed properly to prevent electric shock.
properly. Poor installation may cause fire or
electric shock
.
Connecting Indoor and Outdoor Electric Wires
Fig.6
1.Open the front panel.
2.Remove the wiring cover and wire clamp.Make the power connection cord pass through the hole
3.Connect and fix the power connection cord to the terminal board. (As shown in Fig.6)
4.Fix the power connection cord with wire clamp and reinstall wiring cover.
5.Reinstall the front panel.
Installation of Indoor Unit
18K
at the back of indoor unit.
26
