New GentleYAG
Focus Lens Replacement Procedure
Candela Corporation
8503-01-0838 Revision 01
Candela Corporation Proprietary
Page 3 of 5
Figure 1: Fiber Focusing Assy.
6. Remove the Lens housing (7122-00-7476):
6.1. Remove Jam nut.
6.2. Pry out the first lens with Exacto knife, or turn the barrel upside down and tap it
sharply onto a clean piece of paper on a table.
6.3. Pry out the first o-ring.
6.4. Remove the spacer.
6.5. Push out the second lens.
7. Replace or clean optics and o-rings as needed:
8. Lens Housing Assembly procedure (refer to drawing 7122-99-7476 for re-assembly):
