Candela AlexTriVantage, Operator'S Manual

Page: 61 / 116

8501-00-1800, Revision 05 Confidential 2-31
Candela Corporation AlexTriVantage Laser System
Setting Maintenance Mode
If you hold the wrench button for at least 5 seconds, the system enters Maintenance mode.
Maintenance mode is only used by Candela Service Personnel.
Screen Lock Button
The AlexTriVantage Laser system has a password protected software lock to prevent
unauthorized use of the laser. The laser remains in warm up mode when the software lock is
engaged.
To lock the screen, select the Screen Lock button (see Figure 2-29 ).
Figure 2-29: Screen Lock Button
A dialog appears asking if you want to lock the screen now (see Figure 2-30 ).
Figure 2-30: Lock Screen Now Screen
Select the checkmark to confirm the screen lock or select the X to cancel.
If you select the checkmark, the system is put into Standby and all screen buttons are locked
except for the Screen Lock button.