Candela Technologies Inc., 2417 Main Street, Suite 201, P.O. Box 3285, Ferndale, WA 98248, USA
www.candelatech.com | [email protected] | +1 360 380 1618
Quick Start Guide
1. Connect Management Ethernet port to Management network or management PC. If connecting directly
to a PC, an Ethernet cross-over cable should be used.
2. Connect eth1 wired Ethernet interface to wired Ethernet interface on the AP or network under test. This
usually is considered the 'server' side of the network.
3. The Client side of the network will be the Virtual Stations configured on the CT520 WiFi NIC(s).
4. Connect power to standard US or European AC power source. If using external battery pack, then
connect to that instead.
5. Install the LANforge-GUI on a separate management PC or Laptop. Windows and Linux GUIs are
supported: Select the correct one from the CDROM or Candela Technologies Download page and install
it. The CT520 appliance has a web server that also provides the LANforge GUIs.
6. The CT520 should now boot. If DHCP is enabled on the Management network, the CT520 will
automatically acquire an IP address. If DHCP is not available, the IP address will be set to
192.168.1.101 by the LANforge scripts.
7. Start the LANforge-GUI on the management PC and click the 'Discover' button. It should find the CT520
appliance and add the IP address to the drop-down box in the Connect widget. Press 'Connect' and you
