Load and Testing MACH
MP3000-Basic
.
After you have installed MACH and run the MP3000E_INSTALL on the Support CD, open
MACH using either the
and the MP3000-Base selection from the list OR
using the
Icon created in the desktop.
You should see the following screen or something very close. If you are missing the icon or
it’s not in the selection list, re-run the MP3000E-INSTALL again. If you have the Profile
(MP3000-Basic) listed in the MACH Loader and the screen does not display go to the top
menu bar and select VIEW/Load Screens and naviagate to the MACH3 folder and select
MP3000-Basic.set. If it is missing any of the Bitmaps (picture buttons and/or backgrounds
then confirm the Installer created the CandCNC folder under the MACH3/Bitmaps Folder
and there are files in that folder. We have included a ZIp file on the CD of all the bitmaps
and the ZIP file is on the CandCNCSupport Forum site in the FILES/MP3000 Support Files
Folder. You can UNZIP the files in the Bitmaps.ZIP file directly to the
MACH3/Bitmaps/CandCNC folder. Along with bitmaps and other features the MP3000
screens contain several custom functions embedded as code behind certain buttons. If you
elect to use another screen SET file with the MP3000 be aware some functions may not
work
MACH Loader
PCSOFTW
ARESETUP
