MAINTENANCE OF YOUR LADDER
A visual check for structural damage should always be performed prior to using the ladder.
Frequent greasing of wheels, caster bearings and trip step rollers will help to prolong the life of your ladder.
Keep steps and platform clean and free from debris.
For replacement parts (wheels, casters, rubber glides, and touch-up paint) see your Distributor.
USER GUIDE AND WARNINGS
CARE AND USE OF YOUR LADDER
• Users must read and understand the user instructions before being allowed to use a ladder stand. As an alternative, employers must instruct
employees in the proper use of the units prior to allowing use.
• Ladder stand unit must be visually inspected prior to use. Inspection is for damage, unusual wear, deterioration or corrosion. Any loose bolts,
nuts or connections must be tightened. All threaded fasteners must be equipped with locking hardware.
• Damaged or weakened components are not to be used until repaired. Units that are damaged subsequent to their receipt and/or are worn
beyond repair must be removed from service.
• Overreaching while on a unit can cause instability and result in a fall. Always place the unit in close proximity to the work. Descend from unit
and relocate it to avoid overreaching.
• General maintenance of a ladder stand includes cleaning, lubrication, painting and replacement of wheels, casters and rubber pads.
• Ladder stands and ladder stand platforms must never be moved while occupied.
• Units must not be loaded beyond their Rated Load capacity. Materials and/or equipment must not be stored on the steps or platform of a unit.
• Additional height must not be gained by the addition of any type of extension or object being placed upon the unit.
• Users must remove foreign materials, such as
mud or grease, from their shoes prior to
ascending.
• Handrails should be used while ascending
or descending. The user must face the steps
while ascending or descending.
• Occupied units must not be placed in front of
a door unless the door is secured in an open
position, locked, attended or barricaded.
• Use ladder stands only on level surfaces. They
are not to be used on uneven or sloping
surfaces.
Users are not permitted to
stand on components of the
unit other than the steps or
platform. Climbing a
damaged ladder is not
permitted. Repairs of units
must be performed by
qualified personnel only.
Users are cautioned to take
proper safety measures when
units are used in areas where
& electrical lines exist. These
precautions should prevent
any contact or possible
contact with an energized
insulated conductor (electrical
lines) in order to avoid shock.
RL1NH
RL1H
RL20H
RL18H
RL16H
RL15H
RL15H
RL14H
RL13H
RL12H
RL11H
RL2H RL3H
RL4H
RL5H
RL6H
RL7H
RL8H
RL9H
RL10H
RL2NH
RL3NH
RL4NH RL5NH
