13
ERROR CHART
E-1: Indicates that an overcurrent has
occurred. Restart the machine, and welding
can be continued.
E-2: Indicates that the main voltage is overly
low, welding can be recovered when the main
voltage returns into normal range.
E-3: Indicates that the main circuit has been
overheated, shutting down the machine. Once
the temperature has dropped the machine can
resume welding, it is not necessary to restart
the machine.
E-4: Indicates current sensor is faulty and
current value at this time during use is not
accurate. Sensor must be replaced, but the
machine can continue to weld temporarily.
Summary of Contents for TIG P201 DC
Page 1: ...0 User Manual Model TIG P201 DC...
Page 23: ...22 Electrical Schematic Diagram...
Page 28: ...27...
