CANAWELD Plasma Cut 45 D, User Manual

Page: 9 / 24

9
SECTION 2 - Installation and Overview
INSTALLATION
ELECTRICAL
•
The serial number and rating information is located on the bottom of the machine. Use the
rating labels to determine input power requirements and rated output.
•
Check whether the voltage value variations are within the acceptable working range with a
multi-meter.
•
(A) The input cable of the machine is ready to be plugged into a 230V/120 V
10%
−
+
compatible
connector / socket or
(B)
you can remove the installed plug and have the input cable “hard” wired into the
appropriate building electrical panel.
•
Electrical installation must meet all National and Local Codes− have only a qualified electrician
do the installation.