2
PAGE
How Your System Works
2
Before You Start
3
Tools Needed
3
System Location
3
Installing the Filters
4
Installing the Faucet
4
Installing the Self-Piercing Inlet Saddle Valve
5
Installing the Unit
5
Installing Tubing Into Fittings
5
Installing Tubing Connections
6
Flow Diagram
6
Guarantee
8
How Your System Works
For best results it is recommended to install the filter on a COLD raw water (non-softened) water supply.
The 475 Pro Series systems uses up to three stages of treatment to filter your water:
Stage 1
- SED-10 to remove sand, dirt, sediment
Stage 2
- COC-10 / GAC-10 to remove chlorine, taste & odors, very fine particulates
Stage 3
- UF-10 to reduce lead, VOC, and fine particles down to 0.2 micron
The system is compact and can be installed under the sink or another convenient place close to the faucet.
The closer the proximity to the faucet the better the system flow rate
.
Recommended Filter Change Schedule
Your filters require changing on a regular basis. Instructions to change them are on page 8. The schedule
below is the minimum recommendation. Depending on your water conditions the filters may need to be
changed more often.
Table of Contents
Disposable Filters
Change Schedule
Sediment (SED-10)
Every 12 months
Carbon (COC-10)
Every 12 months
Carbon (GAC-10)
Every 12 months
Ultra-Filter
Every 12 months
