What's Included
• 1 x Solo II Portable Micro-Heater
•
1 x Solo II Charger / Power Adapter
•
1 x Solo II Glass Aroma Tube (90mm)
•
1 x Solo II Glass Aroma Tube (110mm)
•
1 x Solo II Glass Aroma Dish
•
1 x Solo II PVC Travel Tube w./ Cap (90mm Size)
• 1 x Solo II PVC Travel Tube w./ Cap (110mm Size
)
• 1 x Solo II PVC Travel Tube w./ Cap (Aroma Dish Size)
• 1 x Solo II Belt-Clip Carry Case
• 2 x Solo II Silicone Stem Caps
• 4 x Solo II Stainless Steel Filter Screens
• 1 x Stainless Steel Stirring Tool
• 1 x Sample Aromatic Botanicals
• 1 x Solo II Owner's Manual
Control Panel
The Control Panel consists of the OLEO and three buttons: the Menu (M) button and the Up (&) & Down
(T)
arrow buttons. Use the Menu button to navigate through
the different settings and use the Up & Down buttons to adjust them.
Temperature Settings
- The Solo ll's optimized heating system warms up fast and has a wide temperature range of 50° C - 220• C (122° F - 428° F).
The temperature is adjustable in 1-degree increments and 10-degree increme_nts.
Audio / Beep
- The Audio / Beep function has three volume settings and can be turned on and off. If the Audio / Beep is activated, a beep will be
heard when the Solo II is powered on or off. If the Audio / Beep is deactivated, the Solo II remains silent when powered on or off.
Power-On Delay
- The power-on delay safety feature ensures you don't accidentally turn on the unit and has three settings for your convenience:
4 Seconds, 6 Seconds, and 8 Seconds. The default setting is 6 seconds.
Automatic Shut-Off Timer
- The automatic shul-off timer safety feature ensures you don1 forget to turn off the unit and helps conserve battery life.
The shut-off timer can be adjusted between 5 - 15 minutes in one-minute increments. The default setting is 1 0-minutes.
Celsius or Fahrenheit
- The Solo II display can be set to Celsius or Fahrenheit. The default setting is Celsius.
Display Brightness
- The Solo II display has three brightness settings: low, medium, and high. The default setting is medium.
Operation
(1) Load Glass Aroma Tube
Put some coarsely ground botanicals in a small container then gently push and
slightly twist the glass stem into the container to fill the dish. Do not press too
hard or pack too tightly. Loading the Glass Aroma Tube this way takes
advantage of it's design ensuring easy maintenance and optimal performance.
(2)
Insert the Glass Aroma Tube
Pre-heat unit before inserting any tight tubes. You can carry pre-loaded Glass
Aroma Tubes in your Solo II Carry Case for quick and easy vaping on the go!
(3)
Press and hold the Up ( A) & (M) buttons to turn on the unit.
Atimer will count down on the OLEO screen showing the power-on delay and a
greeting message is displayed when the unit is powered on.
(4)
Set the temperature and let the unit heat up.
Press one of the three control panel buttons and the Solo II will start to heat up to
the previously used temperature. Press the ( A) and ( 'f') buttons to adjust the
temperature in 1-degree increments, or hold the button down to adjust the
temperature in 10-degree increments.
(5) Inhale vapors
Inhale vapors through the Glass Aroma Tube in a slow steady draw. Try using
different inhaling techniques with different temperatures to suit your personal
needs / preferences.
www.canatura.com/en
Summary of Contents for SOLO II
Page 1: ...www canatura com en...
