1. Register S/N (found at bottom of packaging device) at
GPEN.COM/register
2. Fully charge battery from micro USB port located at the
bottom of device:
a.LED lights blinking in sequence represents charging
b.LED lights shining solid represent fully charged
c.Number of LED lights shown after vaporization temperature
is reached indicates remaining battery life
3. Remove mouthpiece
4. Load ground material into chamber (not intended for use
with tobacco, liquid or concentrates)
5. Completly attach mouthpiece
6. Press button five times to power ON / activate heating.
7. Press and hold button to select desired temperature range:
BLUE - 375F / 190C
GREEN - 400F / 204C
RED - 428F / 220C
8. All LED lights blinking indicate heat up. Once all LEDs are
lit, place lips over mouthpiece, then inhale.
9. Device will shut off automatically after four minutes of
activation
10. Press button five times to power OFF manually
11. Keep away from all liquids.
