Directions for use of the Fenix Pro Vaporizer :
The chamber/bowl is reached by simply sliding the mouthpiece.
Fill the bowl without tamping it for optimal results. This allows the hot air to pass through evenly
and mix your plants easily during the session.
Once the bowl is filled and closed:
5 successive presses turn on the Fenix Pro vaporizer and start the heating process. It will start a 4
minute cycle before automatically shutting off
The OLED display shows the current temperature and the selected temperature.
You can then inhale
Remember, as with any vaporizer, the softer you suck, the bigger the slat you get, the harder you
suck, the smaller the slat you get because the air hasn't had time to warm up and it cools the bowl
Your Fenix Pro vaporizer will stay on for 4-7 minutes before turning off, and a second counter
will count down on the OLED screen
Your battery level and set temperature are also displayed on the OLED screen
To restart your vaporizer, 5 successive presses are enough.
The battery status is shown next to the heating time and temperature on the OLED display.
To change the ignition time, press and hold the ON button until you see the SET indication, then
press the + or - button to increase or decrease the time between 180 and 360 seconds.
To check the battery status when your Fenix Pro vaporizer is turned off, just press the ON button
briefly.
To know when your session is over, your herbs no longer emit vapor or taste at the maximum
temperature of 221°C on this vaporizer. As a rule of thumb, it takes two to three sessions at the
maximum temperature to finish a dose, which is 8 to 12 minutes, making the Fenix Pro an efficient
vaporizer in terms of extraction.
www.canatura.com/en
