At this time, it is advisable to replace the ceramic disc with a new one. Please
purchase a new ceramic disc & tool from your local distributor, and refer to the
Fogger Unit Drawing to install the new ceramic disc. Please purchase Canary
Product item M-11 ceramic disc so that it will fit your fogger unit accordingly.
INSTRUCTIONS FOR REPLACING FOGGER UNIT DISC
a.
Unplug the unit and remove from the glass bowl. Dry the fogger unit completely
with a soft cloth.
b.
Insert the tool into the winding ring and unscrew counter clockwise.
c.
Remove the winding ring and old ceramic disc.
IMPORTANT: note the front and back of the ceramic disc. Be sure to reinstall with
the correct side; white side up.
d.
The inside area of the unit cavity must be completely dry before the parts are
installed.
Caution:
INSTRUCTIONS FOR USING INLINE CONTROLLER AND INFRARED
CONTROLLER
INLINE CONTROL:
1.
ON the side of the side of the inline control, you can turn OFF or ON the fogger
unit.
2.
The “SPEED” button controls the speed for the alternating lights. From “MODE”
1-9 the “SPEED” function is available. For “MODE” 10-16 the SPEED option is
not relevant- as the light stays constant and does not alternate. You will know if
the “SPEED” function is available, when you are from MODE “1-9” only if the
orange light is on, on the “SPEED” button.
3.
The “SPEED” button completes a whole cycle of alternating colors listed below.
The speed options are: 1 second, 4 seconds, 7 seconds to complete a whole cycle.
Simply click on the “SPEED” button to control the speed at how fast you want
the colors to be changing.
4.
On the inline control the “MODE” button allows for alternating colors. Please see
the list of option for changing the colors to the choice you prefer. (Please note
when you turn on the fogger, your fogger may start at MODE 10)
<Drawing No.1>
Water Lever
Sensor Switch
Rubber Tuck
LED Lamp
Front Of
Ceramic Disc
Behind Of
Ceramic Disc
Tool
Winding Ring
Ceramic Disc
Sealing Washer
Mist Cavity
MODE
SPEED
ON OFF
Infrared Receiver
<Drawing No.3>
