Screws and
Lock Washers
Style #2
MOUNT MOTOR TO MOUNTING BRACKET
- Place the looped end of the safety cable over the J-Hook.
- Remove the four bottom screws and washers from the mounting bracket.
- Remove the temporary hanging hook.
- Align motor with mounting bracket and slide in place until the four holes
line up.
- Tighten motor to mounting bracket using the four screws and washers
previously removed.
- Neatly tuck all electrical wires into outlet box.
Pg.
#7
3.
Pg.
#6
ELECTRICAL HOOK UP (Continued)
CONNECTING
BLACK,
WHITE,
AND
(RED
OR
BLUE)
WIRES
-
Connect
white
wire
from
outlet
box
to
white
wire
from
fan
using
(not
supplied).
-
Connect
black
wire
from
outlet
box
to
black
wire
from
fan
plus
(red
or
blue
wire)
using
a
NOTE
: A red
or
blue
wire
would
feed
power
to
a
light
kit
if
applicable.
Red
or
Blue
Wires
White
Wires
Black
Wire
Ground
Wire
NOTE: Once
ground
wires
are
connected,
carefully
tuck
wires
and
marrettes
into
supply
box.
2.
B
Screw
Safety Cable
Lockwasher
Style #1
Fig. 3d
Fig. 4a
Fig. 4b
-
-
After making the wire connections, ensure the wires should be spread
apart with the grounded conductor and the equipment-grounding
conductor on one side of the outlet box and the ungrounded conductor
on the other side of the outlet box.
Ensure the splices after being made should be turned upward and
pushed carefully up into the outlet box.
marette.
marettes
