1
1
.
.
ATTACH THE FAN BLADES
- Attach the blades to the fan motor assembly using the screws and flat
washers.
Pg. #4
Fig.2a
Fibre Washer
Metal Washer
Blade
Bracket Screw
Blade
Blade Bracket
- Mount the motor cover to the fan motor assembly, aligning screws in
motor fan assembly with the key slots on the motor cover.
Pg. #9
ELECTRICAL HOOK-UP
4
4
.
.
5.
MOUNTING FAN ASSEMBLY
- Place two screws and washers on mounting plate (marked B on diagram)
which correspond with slots in canopy. Screw in two turns.
- Position canopy to mounting plate aligning slots to screws (marked B on
diagram) then turn to lock.
- Position and tighten the two screws and washers (marked A on diagram)
then tighten the two screws (marked B on diagram).
6.
6.
ENGAGE HEMISPHERE (Downrod Mount Only)
- Carefully rotate fan assembly until groove in hemisphere locks over tab of
canopy assembly.
CONNECTING BLACK, WHITE, AND (RED OR BLUE) WIRES
NOTE
: Once wires are connected, carefully tuck wires and marrettes into the
outlet box making sure that the wires are clear of the hemisphere
and downrod when positioned in mounting bracket
(Downrod Mount Only).
B
Fig. 6
- Connect white wire from outlet box to white
wire from fan using marret (not supplied).
- Connect black wire from outlet box to black
wire from fan plus (red or blue wire) using
a marret.
NOTE
: A red or blue wire would be power
for a light kit if applicable.
Black Wire
White Wire
Red or Blue
Wire
NOTE:
When installing fan on sloped ceiling, make sure tab on hanger bracket
faces towards the top of the slope. Depending on the slope, a longer
downrod may be required to prevent fan blades from hitting the ceiling.
Groove
(A)
(B)
(B)
Washers
(A)
Fig.7b
Fig.7a
Light Kit
White Wires
Black or
Blue Wires
Red or Blue
Wires
Fig.2b
Screw
Light Kit
Chain
A
A
For model Calibre III: Fig.2a and 2b
Downrod
Hemisphere
WARNING: Failure to seat tab in groove could cause damage to
electrical wires and possible shock or fire hazard.
- Connect polarized connectors of light kit to corresponding connectors
found in switch housing.
