Locate the shower pillar top plate and secure it to the
top of the assembled pillar assembly with 1 ½”
(38mm) screws ensuring it is even on both sides.
tel: 888-923-9813 | [email protected]| web: www.leisurecraft.com
Manufactured by:
3
Secure the front/back floor supports to the 2 outside
floor joists with 2 -
2 ½” (64mm) screws in each corner.
Center the inner floor supports and secure with
2 -
2 ½” (64mm) screws on both sides.
Space the floor boards out evenly over the base and
secure into each of the floor joists using 2
– 1 ½”
(38mm) screws into each joist.
Savannah Outdoor Shower
Assembly Instructions
Position the assembled pillar flush to the back of the
shower base.
Secure the assembled pillar to the base with the
provided lag screws.
* It is recommended to pre drill these holes first to
prevent splitting.
