K I N G S T O N
K I N G S T O N
(4)
1. FILTER BASKET:
Assembly that holds the filter cartridge (Note:
configurations may differ from model to model).
2. SPA PILLOW:
To rest you head and neck (replaceable).
3. AIR CONTROLLER
: These are located around the top of your spa.
Increase or decrease the force of your jets by opening or closing
the air control valves.
4. ILLUMINATED CUP HOLDERS:
Placeholder for drinking
receptacle.
5. WATERFALL & FOUNTAIN ON/OFF VALVES:
Located on top rail
of spa used to adjust the waterfall/fountain flow.
6.
SPEAKERS:
Audio speaker system
for playing music from an
MP3 device
7. AROMATHERAPY:
A small canister that holds scented beads and
works in conjunction with the air control system to create an
aromatic experience.
8.
TOPSIDE CONSOLE:
Button pad and temperature display panel
located on the top of the spa into which various commands,
control sequences and options for operating the spa can
be input. User can set temperature, filtration cycle and heating
mode through the console.
9.
SUCTION FITTING:
Located at the bottom of the spa, used to
return water back into the filter and pump system.
10.
JETS (VARIOUS):
Device that ejects air and water, creating water
movement in the spa. Adjustable, directional, rotational and
interchangeable.
11. WATERFALL & PERIMETER LIGHTING:
To create a relaxing spa
mood.
12. LARGE DIVERTER:
Diverts the flow of water from one jet zone to
another
13.
LED FOUNTAIN JETS
14.
MAIN
SPA LIGHT
15. DRAIN OUTLET
12
14
3
3
3
9
8
10
1
7
4
12
3
5
2
6
12
11
6
13
15
CONTROL PACK:
Unit that controls spa operations, containing electronic programming boards, heater and all connections for
Pump(s), Light(s), Ozone Generation Unit and Topside Console. Also referred to as ‘Spa Pack’ or ‘Controller’.
HEATER:
Electrical resistance device located in the Spa Controller containing the heating element and 2 temperature sensors.
The flow through heater heats the spa’s water as it flows across the heating element. Heaters are available in several wattages.
MASSAGE PUMP:
Electro-mechanical device to move water, consisting of a wet end and a motor.
OZONE /UV GENERATOR:
Device that generates ozone to aid in maintaining water quality. Generates Ozone and UV to help eliminate
organic material such as body oils, dead skin cells and hair.
DRAIN VALVE:
Valve located on the outside of spa cabinet used to drain water from the spa. A garden hose can be attached to the
drain valve.
EQUIPMENT BAY:
Located under the spa shell covered by access panels that houses the spa controller and equipment.
SLICE VALVE:
Two-position (open or closed) sliding valve, used to cut off water flow which allows for service to be performed on
the spa equipment without the need to drain the spa. Slice valve operations: up for open, down (toward the valve body) for closed.
Hot tub equipment side
Hot tub side view
LED Pop-up speaker
Slice valves
LED Pop-up speaker
2.5” Pump
union
2.5” Pump
union
Control
pack
Ozone
Generator
Pump 1
Pump 2
MP3
Amplifier
Heater
(5)
3” Directional jet
Adjustable and interchangeable jet features
a directional nozzle. The jet can be removed
by turning it counter-clockwise. To replace
the jet push inward and clockwise until it
clicks into place.
3” Massage jet
Rotational and interchangeable jet which
spins to deliver a soothing massage. The jet
can be removed by turning it counter-
clockwise. To replace the jet push inward
and clockwise until it clicks into place.
2” Directional jet
Adjustable and interchangeable jet features a
directional nozzle. The jet can be removed by
turning it counter-clockwise. To replace the
jet push inward and clockwise until it clicks
into place.
5” (Jumbo) Directional jet
Adjustable and interchangeable jet features a
directional nozzle. The jet can be removed by
turning it counter-clockwise. To replace the jet
push inward and clockwise until it clicks into
place.
5” Massage jet
Rotational and interchangeable jet features an
internal spinner to deliver a low pressure sooth-
ing massage. The jet can be removed by turning
it counter-clockwise. To replace the jet push
inward and clockwise until it clicks into place.
Air Controller
These are located around the top of
your spa. Increase or decrease the
force of your jets by opening or closing
the air control valves.
Aroma basket cap
Open cap to place aromatherapy
beads. Close after use.
Waterfall control
Located on the topside of the spa,
this valve adjusts water flow to the
waterfall.
HOW JETS WORK
Air is mixed with the water by using the air controls to create massage(s) of varying degrees. Water flow is adjusted by simply turning
the outer face of the full sized jets. Our hot tubs have a combination of pulsating, rotating, and directional adjustable jets.
(4)
